Climate Control

Showing 1–12 of 20 results

  • Portable Axial Clip Fan 15cm (6”)

    Quick Overview

    This compact yet powerful fan offers a great option for air movement and circulation in a small grow area. Simply clip it onto one of the poles inside a grow tent or similar area and point in desired direction.

    Features:

    • Two speeds, non-oscillating
    • Strong spring-loaded clip for multiple uses
    • Popularly used in grow tent by clip on poles
    • Power Cord: 5ft long
    $19.99

  • ProFlex Aluminum Ventilation Ducting (4″,6″,8″)

    Quick Overview

    ProFlex flexible aluminum ducting is ideal for greenhouse, grow room and grow tent fan and carbon filter exhausting. The ducting stores and dissipates heat at a steady rate, which reduces room temperature fluctuations. Interlocking steel strips form an air tight and leak proof system.

    All ProFlex ducting is 25 feet long and available in 4”, 6”and 8” diameters. Two duct clamps are included with all ducting.

    Features:

    • Made from high quality 3 ply ultra thick aluminum laminate for unparalleled durability
    • Strong and flexible
    • Fire-resistant coating.
    • Contains corrosion resistant wire helix
    • Includes metal clamps (set of 2)
    • Operating temperature range of this ducting is 0 to 100°C

     

    $16.99$22.99

  • Variable Fan Speed Controller

    Quick Overview
    • 3 Settings: Off, Full, and Variable speed
    • Recommended use for high velocity inline fans
    • Speed dial allows for easy adjustment of fan speed
    • Lightweight, practical and easy to use
    • Fan runs quieter and saves on electricity when adjusted to low/medium speed
    • Comes with 6ft Grounded Power Cord
    • Recommended use for high velocity inline fans and mini blowers
    • CE listed
    • 1-Year Warranty
    $29.99

  • Inline Air Duct Noise Silencer (4 inch)

    Quick Overview

    Features:

    • Two flanged ends that connect easily to ducting
    • Polyurethane acoustic foam decreases fan noise by up to 50%
    • Easy to install and maintenance free
    • High-quality corrosion resistant galvanized steel sheet construction
    • Moisture resistant – great for use in damp environment

    Specifications:

    • Outer Material: Durable galvanized steel sheet
    • Sound Absorbing Foam: Wave crest polyurethane sponge
    • Fusion Point of Foam: 250 degrees centigrade
    • Size: 4” diameter and 12” long
    $32.99

  • Plastic Inline/Booster Fan – 4” (100mm)

    Quick Overview

    A great low cost option for small grow areas or as a duct booster fan for large grows

    • Specially designed for indoor cultivation
    • Power cord and plug included; ready to use
    • Quiet and energy efficient
    • Fits into metal or flex ducts
    • Can be used with small carbon filters
    • ABS plastic outer material and a copper oil-bearing motor
    • Power: 12W
    • Air Flow: 77CFM
    $36.99

  • MaxFlow Duct Booster Fan – 4” (100mm)

    DB-01
    Quick Overview

    Duct booster fans give your grow tent or grow room an extra boost of airflow. They push stale air, dust, and odors outside or in to a carbon filter. A booster fan gives your entire grow the air it needs to grow strong.

    Instructions for use:

    Just locate where your airflow starts to drop off and note the spot on the ducting. Cut the ducting where the air begins to fall off and attach it to the back of the in-line booster. Attach the remaining portion of your ducting to the front of the booster fan, clamp both ends to hold the ducting in place, and finish lining your ducting.

    Specifications:

    • 100 CFM air flow
    • 45 db(a) noise rating
    • 12W power consumption
    • cETL Listed Fan
    • pre-wired 1.6m 120V/240V power cord
    • manufactured for maximum boost and quiet operation
    • perfect for smaller gardens, such as mid-size grow tents and rooms.
    $39.99

  • MaxFlow Duct Booster Fan – 6” (150mm)

    DB-01-1
    Quick Overview

    Duct booster fans give your grow tent or grow room an extra boost of airflow. They push stale air, dust, and odors outside or in to a carbon filter. A booster fan gives your entire grow the air it needs to grow strong.

    Instructions for use:

    Just locate where your airflow starts to drop off and note the spot on the ducting. Cut the ducting where the air begins to fall off and attach it to the back of the in-line booster. Attach the remaining portion of your ducting to the front of the booster fan, clamp both ends to hold the ducting in place, and finish lining your ducting.

    Specifications:

    • 240 CFM air flow
    • 51 db(a) noise rating
    • 37W power consumption
    • cETL Listed Fan
    • pre-wired 1.6m 120V/240V power cord
    • manufactured for maximum boost and quiet operation
    • perfect for smaller gardens, such as mid-size grow tents and rooms.
    $42.99

  • Inline Air Duct Noise Silencer (6 inch)

    DS-06
    Quick Overview

    Features:

    • Two flanged ends that connect easily to ducting
    • Polyurethane acoustic foam decreases fan noise by up to 50%
    • Easy to install and maintenance free
    • High-quality corrosion resistant galvanized sheet construction
    • Moisture resistant – great for use in damp environment

    Specifications:

    • Outer Material: Durable Galvanized Sheet
    • Sound Absorbing Foam: Wave crest polyurethane sponge
    • Fusion Point of Foam: 250 degrees centigrade
    • Size: 6” diameter and 18” long
    $59.99

  • Clean Air Carbon Filter (4″ x 12″) 210CFM

    CF-0412
    Quick Overview

    The ProGrow clean-air activated carbon filter has been developed with ease of installation, durability and effectiveness in mind. The filter is constructed with a 40mm thick carbon layer and a removable flange which allows for replacement with fresh carbon pellets when required. It can either be used to eliminate odours leaving the grow area or to purify air entering the grow area when used in conjunction with an inline fan.

    Features:

    • Inner and outer mesh provides 53% of open area allowing for increased air flow
    • Highly effective, low density virgin carbon
    • Machine packed carbon enables 100% filtered air flow
    • Switchable filter flange and base allow for new carbon exchange
    • Includes changeable Velcro pre-filter

    Specifications:

    • Dimensions: 4″ inner diameter  x 7″ outer diameter x 12″ tall
    • Connecting Flange: 4″ (10cm)
    • Maximum Airflow: 210 CFM (+/-5%)
    • Carbon bed thickness: 1.6″ (40mm)
    • Life Span of 12 to 18 months depending on usage time
    $64.99

  • Clean Air Carbon Filter (6″ x 12″) 270CFM

    CF-612
    Quick Overview

    Features:

    • Inner and outer mesh provides 53% of open area allowing for increased air flow
    • Highly effective, low density virgin carbon
    • Machine packed carbon enables 100% filtered air flow
    • Switchable filter flange and base allow for new carbon exchange
    • Includes changeable Velcro pre-filter

    Specifications:

    • Dimensions: 6″ inner diameter  x 9″ outer diameter x 12″ tall
    • Connecting Flange: 6″ (10cm)
    • Maximum Airflow: 270 CFM (+/-5%)
    • Carbon bed thickness: 1.6″ (40mm)
    • Life Span of 12 to 18 months depending on usage time
    $79.99

  • Clean Air Carbon Filter (4” x 20”) 350CFM

    CF-420
    Quick Overview

    The ProGrow clean-air activated carbon filter has been developed with ease of installation, durability and effectiveness in mind. The filter is constructed with a 40mm thick carbon layer and a removable flange which allows for replacement with fresh carbon pellets when required. It can either be used to eliminate odours leaving the grow area or to purify air entering the grow area when used in conjunction with an inline fan.

    Features:

    • Inner and outer mesh provides 53% of open area allowing for increased air flow
    • Highly effective, low density virgin carbon
    • Machine packed carbon enables 100% filtered air flow
    • Switchable filter flange and base allow for new carbon exchange
    • Includes changeable Velcro pre-filter

    Specifications:

    • Dimensions: 4″ inner diameter  x 7″ outer diameter x 20″ tall
    • Connecting Flange: 4″ (10cm)
    • Maximum Airflow: 350 CFM (+/-5%)
    • Carbon bed thickness: 1.6″ (40mm)
    • Life Span of 12 to 18 months depending on usage time

     

    $79.99

  • ProGrow Inline Duct Fan – 4″ (100mm)

    Quick Overview

    This 4 inch (100mm) inline duct fan features a high power motor and an aerodynamic design for optimal grow room ventilation. It is able to move air through long stretches of ducting, grow light reflectors and carbon filters. Exchange old stale air with fresh air, keep temperature and humidity at desired levels and cool your reflector with this top-quality blower.

    Features:

    • High static pressure to overcome the resistance caused by long ducting
    • Permanently lubricated ball bearings for quiet and vibration free operation
    • Durable ceramic-coated metal housing
    • High quality molded impeller and thermally protected AC motor
    • Suitable for domestic, commercial and industrial applications
    • Mounting brackets and a 2.5m power cord are included
    • ETL recognized components, CE certified

    Specifications:

    • CFM: 206
    • RPM: 2650
    • Input Power (w): 60
    • Current (Amps): 0.30
    • Pressure (Pa): 320
    • Noise db(A): 47
    • Frequency (Hz): 50

     

    .

    $89.99

Twitter
Instagram
Facebook
Facebook