Fans

Showing all 8 results

  • Portable Axial Clip Fan 15cm (6”)

    Quick Overview

    This compact yet powerful fan offers a great option for air movement and circulation in a small grow area. Simply clip it onto one of the poles inside a grow tent or similar area and point in desired direction.

    Features:

    • Two speeds, non-oscillating
    • Strong spring-loaded clip for multiple uses
    • Popularly used in grow tent by clip on poles
    • Power Cord: 5ft long
    $19.99

  • Variable Fan Speed Controller

    Quick Overview
    • 3 Settings: Off, Full, and Variable speed
    • Recommended use for high velocity inline fans
    • Speed dial allows for easy adjustment of fan speed
    • Lightweight, practical and easy to use
    • Fan runs quieter and saves on electricity when adjusted to low/medium speed
    • Comes with 6ft Grounded Power Cord
    • Recommended use for high velocity inline fans and mini blowers
    • CE listed
    • 1-Year Warranty
    $29.99

  • Plastic Inline/Booster Fan – 4” (100mm)

    Quick Overview

    A great low cost option for small grow areas or as a duct booster fan for large grows

    • Specially designed for indoor cultivation
    • Power cord and plug included; ready to use
    • Quiet and energy efficient
    • Fits into metal or flex ducts
    • Can be used with small carbon filters
    • ABS plastic outer material and a copper oil-bearing motor
    • Power: 12W
    • Air Flow: 77CFM
    $36.99

  • MaxFlow Duct Booster Fan – 4” (100mm)

    DB-01
    Quick Overview

    Duct booster fans give your grow tent or grow room an extra boost of airflow. They push stale air, dust, and odors outside or in to a carbon filter. A booster fan gives your entire grow the air it needs to grow strong.

    Instructions for use:

    Just locate where your airflow starts to drop off and note the spot on the ducting. Cut the ducting where the air begins to fall off and attach it to the back of the in-line booster. Attach the remaining portion of your ducting to the front of the booster fan, clamp both ends to hold the ducting in place, and finish lining your ducting.

    Specifications:

    • 100 CFM air flow
    • 45 db(a) noise rating
    • 12W power consumption
    • cETL Listed Fan
    • pre-wired 1.6m 120V/240V power cord
    • manufactured for maximum boost and quiet operation
    • perfect for smaller gardens, such as mid-size grow tents and rooms.
    $39.99

  • MaxFlow Duct Booster Fan – 6” (150mm)

    DB-01-1
    Quick Overview

    Duct booster fans give your grow tent or grow room an extra boost of airflow. They push stale air, dust, and odors outside or in to a carbon filter. A booster fan gives your entire grow the air it needs to grow strong.

    Instructions for use:

    Just locate where your airflow starts to drop off and note the spot on the ducting. Cut the ducting where the air begins to fall off and attach it to the back of the in-line booster. Attach the remaining portion of your ducting to the front of the booster fan, clamp both ends to hold the ducting in place, and finish lining your ducting.

    Specifications:

    • 240 CFM air flow
    • 51 db(a) noise rating
    • 37W power consumption
    • cETL Listed Fan
    • pre-wired 1.6m 120V/240V power cord
    • manufactured for maximum boost and quiet operation
    • perfect for smaller gardens, such as mid-size grow tents and rooms.
    $42.99

  • ProGrow Inline Duct Fan – 4″ (100mm)

    Quick Overview

    This 4 inch (100mm) inline duct fan features a high power motor and an aerodynamic design for optimal grow room ventilation. It is able to move air through long stretches of ducting, grow light reflectors and carbon filters. Exchange old stale air with fresh air, keep temperature and humidity at desired levels and cool your reflector with this top-quality blower.

    Features:

    • High static pressure to overcome the resistance caused by long ducting
    • Permanently lubricated ball bearings for quiet and vibration free operation
    • Durable ceramic-coated metal housing
    • High quality molded impeller and thermally protected AC motor
    • Suitable for domestic, commercial and industrial applications
    • Mounting brackets and a 2.5m power cord are included
    • ETL recognized components, CE certified

    Specifications:

    • CFM: 206
    • RPM: 2650
    • Input Power (w): 60
    • Current (Amps): 0.30
    • Pressure (Pa): 320
    • Noise db(A): 47
    • Frequency (Hz): 50

     

    .

    $89.99

  • ProGrow Inline Duct Fan – 6″ (150mm)

    Quick Overview

    This 6 inch (150mm) inline duct fan features a high power motor and an aerodynamic design for optimal grow room ventilation. It is able to move air through long stretches of ducting, grow light reflectors and carbon filters. Exchange old stale air with fresh air, keep temperature and humidity at desired levels and cool your reflector with this top-quality blower.

    Features:

    • High static pressure to overcome the resistance caused by long ducting
    • Permanently lubricated ball bearings for quiet and vibration free operation
    • Durable ceramic-coated metal housing
    • High quality molded impeller and thermally protected AC motor
    • Suitable for domestic, commercial and industrial applications
    • Mounting brackets and a 2.5m power cord are included
    • ETL recognized components, CE certified

    Specifications:

    • CFM: 470
    • RPM: 2600
    • Input Power (w): 150
    • Current (Amps): 0.70
    • Pressure (Pa): 360
    • Noise db(A): 52
    • Frequency (Hz): 50

     

     

    $99.99

  • ProGrow Inline Duct Fan – 8″ (200mm)

    Quick Overview

    This 8 inch (200mm) inline duct fan features a high power motor and an aerodynamic design for optimal grow room ventilation. It is able to move air through long stretches of ducting, grow light reflectors and carbon filters. Exchange old stale air with fresh air, keep temperature and humidity at desired levels and cool your reflector with this top-quality blower.

    Features:

    • High static pressure to overcome the resistance caused by long ducting
    • Permanently lubricated ball bearings for quiet and vibration free operation
    • Durable ceramic-coated metal housing
    • High quality molded impeller and thermally protected AC motor
    • Suitable for domestic, commercial and industrial applications
    • Mounting brackets and a 2.5m power cord are included
    • ETL recognized components, CE certified

    Specifications:

    • CFM: 620
    • RPM: 2550
    • Input Power (w): 180
    • Current (Amps): 0.80
    • Pressure (Pa): 570
    • Noise db(A): 53
    • Frequency (Hz): 50
    $114.99

Twitter
Instagram
Facebook
Facebook