Ballasts & Reflectors

Showing all 3 results

  • Adjustable Wing Reflector

    Quick Overview

    Reflector size: 65x72x20cm (25″x28″x8″)

    • Fits all ranges of HPS/MH lamps (250W/400W/600W/1000W)
    • 95% highly reflective European aluminum
    • Potential to increase yield per lamp up to 50%
    • Higher reflective efficiency of most of other reflectors
    • Built-in E39/E40 mogul base and a 4.5m (15ft) lamp cord set
    • Engineered with a light spreader that eliminates hot spots & reduces plant heat
    • Adjustable up-down socket helps achieve optimum light reflectively





  • 6″ Air Cooled Tube Reflector

    Quick Overview

    The 6” air cooled tube reflector is manufactured using high quality German aluminum and can be mounted vertically or horizontally based on the grow area. It is 24″ (63cm) long and has dual wings that can be adjusted. The tempered glass tube is very durable and there are twin 8″ aluminum flanges on both sides of the glass tube. Ducting can be connected to take in air from outside your grow, pass air over the bulb and vent it back outside your grow room. This feature greatly reduces the heat in the grow area. The reflector is equipped with an industrial 15′ lamp cord and socket that is compatible with all sizes of HPS/MH bulbs and ballasts.


    Reflector size: 24”x6”x6” (63cm x 15cm x 15cm)

    • Fits all ranges of HPS/MH lamps (250W/400W/600W/1000W)
    • 95% highly reflective European aluminum
    • 6″ diameter integrated fittings on both ends
    • Compatible with Magnetic and Digital Ballasts
    • Vertical and Horizontal mounting options
    • Built-in light socket and 15′ (4.5m) cord
    • High quality tempered glass



  • Powerlux 600 Watt Dimmable Electronic Ballast

    Quick Overview

    The digital electronic ballast is a new alternative to previous heavy, noisy and high power consuming “core and coil” ballasts. Electronic ballasts are lighter, smaller, more energy efficient with higher lighting quality and increased garden yields. This ballast features a dimming switch that enables it to run at various light outputs.  This makes it easier for young plants to adapt at various stages of their life cycle and decreases energy consumption in the process.

    The ballast is compatible with both metal halide (vegetative) and high pressure sodium (flowering) bulbs. The electronic ballast operates at a high frequency (20,000Hz) which in turn allows the lamp to operate more efficiently, produce more usable light for plants and to have a longer lifespan. Lamp lumen loss is minimized allowing for a brighter system and higher yields.

     Features and Specifications:

    • Interchangeable between metal halide and high pressure sodium bulbs
    • Output power: 600W
    • Dimmable – Run at 250, 400 or 600 watts
    • Higher lumen output than magnetic ballasts
    • Lightweight, quiet, runs cool and care free
    • Dimensions (L x W x H): 350 x 108 x 79 (mm)/ 13.8 x 4.3 x 3.1 (inch)
    • Operating temperature range: -30 º C to 50 º C
    • Maximum recommended lamp distance from ballast: 15m/49ft
    • Safety and regulation: IEC61347
    • CE/UL/CUL approved